Nikon 1 J3 Firmware Update

Nikon 1 J3 14.2 Megapixel HD Digital Camera

Nikon 1 J3 Firmware Update – Nikon 1 J3 is a compact system camera that features a 14.2-megapixel format sensor and a Nikon 1 lens mount. Offers a 15-fps with continuous autofocus and 60-fps autofocus with fixed-point autofocus, Full 1080p HD video capture, ultra-fast hybrid autofocus systems, unique Moment Capture, and Motion Snapshot Mode, Also, it includes a 3-inch high-resolution LCD screen with 921k point, electronic shutter, and built-in pop-up blitz.

Nikon 1 J3 Firmware Update

Nikon 1 J3 Design and Features

The Nikon 1 J3 is mostly made of aluminum with parts reinforced with magnesium alloy and, therefore, heavier than you think is by size only, with a weight of 201g only for the body (36g lighter than its predecessor, J2).

The Nikon 1 J3 has a small mode button mounted at the top that doesn’t have most of the shooting modes that are usually found on similar buttons – especially P, A, S, and M – though it has enough space to slap it. These modes are available in J3, but you’ll need to dive into a somewhat rambling and not entirely logical menu to find them. The J3 model player now has five settings, motion Snapshot, best moment capture, green Auto photo for beginners, creative mode, and Video.

The Nikon 1 J3 has a hybrid autofocus focus system that combines the detection of difference and phase difference in the same way as Fujifilm F300EXR does. This allows the Nikon 1 J3 to focus very quickly in good light, even on moving subjects. The company claims the Nikon 1 system camera is the fastest focusing machine in the world and fits in with our experience – as long as there is enough light. When the light level drops, the camera switches to contrast-detection AF which, although faster than most cameras, is not as fast as other methods

Nikon 1 J3 Performance

J3 takes about 1-2 seconds between shots, no flash, and one second when the Flash is a used-a good display. Nikon claims the camera automatically chooses between two types of autofocus to take sharp pictures. The camera uses contrast-detection autofocus, with 135 coverage points. This is a very impressive number, and the focusing of the camera is, in fact, reliable, although it sometimes fails to lock focus in low light.

The J3 has a wide ISO range, with settings allowing from 160 to 6400. Although the J3 sensor is not as much of a DSLR sensor, high ISO capabilities are similar. As shown below, images from ISO 160 to 1600 ISO look almost identical, with slight freckles and intense colors. At 3200 There is an increase in graininess, and the image takes a greenish hue. The Grain grows at 6400 ISO, but the image can still be used for small prints.

J3 present in several modes: Automatic, automatic with, fill-flash, fill-flash with slow sync, red-eye reduction, red-eye reduction with slow synchronization, rear-curtain sync (The Flash turns on before the shutter is closed) When used with a 10-30mm f/3.5-5.6 VR zoom lens, the camera’s flash range ranges from 2-23 feet (0.6 to 7 meters) with a minimum zoom and 2-13.8 feet (0.6 to 4.2 meters) at maximum zoom.

Check the camera firmware version

Nikon D800 Firmware Update version

How to Updating the Camera Firmware

  1. Create a new folder on your computer.

  2. Download the Nikon 1 J3 Firmware (F-J3-V120W.exe / F-J3-V120W.dmg) to the folder created in Step 1.
  3. Extract the Firmware file (F-J3-V120W.exe / F-J3-V120W.dmg) containing “J3_0120.bin” (camera firmware) to a folder called “J3Update“.
  4. Copy the file “J3_0120.bin to the memory card that has been formatted in the Nikon 1 J3 camera.
  5. Insert the memory card into the main slot on the Nikon 1 J3 and turn on the camera.
  6. Select the Firmware version in “SETUP MENU” and follow the instructions displayed on the Nikon 1 J3 camera screen to complete the firmware update.
  7. Turn off Nikon 1 J3 camera and remove the memory card after the firmware update process is complete.
  8. Confirm that the Nikon 1 J3 camera firmware has been updated to the new version

Nikon 1 J3 Firmware Update for Windows

Name Firmware Version Download
Nikon 1 J3 Firmware A / B” Ver “1.20 “
Instructions for the firmware update

Nikon 1 J3 Firmware Update for Mac Os

Name Firmware Version Download
Nikon 1 J3 Firmware A / B” Ver “1.20 “
Instructions for the firmware update

See Also Nikon 1 J2 Firmware Update

User Rating 0 (0 votes)

Leave a Reply

Your email address will not be published. Required fields are marked *